Big score!

I bid on this strictly for the cabinet.  It fits well with all of my inherited furniture from my grandparent's house and it's so my style.  A winning bid of $6 brought this little beauty home to me.  It was advertised as being dirty and non-functioning with no attachments.  Here's what I found when I opened this baby up.

Hmm...wonder what I might find in those drawers?  Okay, so it's a smidge dusty and is missing a curved piece (it should be balanced on each side of the drawers).  I opened the drawers and looked inside the cabinet to find these...

Score!  All original attachments, including the quilting guide, screwdriver, Greist buttonholer, and STEEL! needles.  Not bad at all for $6.

It's a 101!

When I bid on this machine, I was blindly accepting Goodwill's assertion that it was a model 99.  Nope, it's more rare than that, it's a Singer 101.  I'm learning how hard it is to locate parts for this rare baby, so I'm not 100% certain that I'll restore it.  I may part it out instead.

I purchased it for the case originally, but found the locks won't work on my other bentwood case.  Still, it's a cool "toy" to play with and if nothing else, I'm keeping that cool, pull-chain light.

New Toy Arrived

My husband is being amazingly wonderful about my growing addiction.  This latest acquisition arrived last week and I didn't have a chance to unwrap it until yesterday.  I purchased it for the bentwood case, hoping to use the lock in my other bentwood case as this one has water damage.  Bad news is the lock isn't a match.  The good news is I think I can fix the bottom of the "new" bentwood case and use it for Black Betty if she won't fit in my latest $6 vintage machine and cabinet win.  (Pictures for that will come later after I clean it up).

The better news is I think I can get this sweet beastie restored for a friend of mine who'd like to purchase a vintage Singer.  This beauty cost me $5 plus shipping...roughly $30 total from Goodwill.  They did a great job of packing her up and she got here in one piece.

I sent them a big Thank You for such a good packing job.

This one is a knee control version (I hate the knee controls as they hit the wrong spot on my leg (I'm too tall for them).  They couldn't power her up either.  A quick check of the power cord reveals a missing locking mechanism, but these are easy enough to replace for less than $20 with updated wiring.

I love this particular light with the little pull chain.  It may get swapped over to my Crinkle machine, just because I think it's SO cool.

Some of the stencils are in really great shape.  I hope to get a good stencil pattern off of this one to make replacement stencils.

Love that it came with the metal cover (they're so often missing) and even better found original bobbins!

The knee control does work well, but the paint is pretty beat up.  Once I dig into her, I'll know if she's worth fully restoring, or would be better to part out and use as a decoration instead.  She's sitting on top of my first $6 machine with cabinet - a Kenmore 117 that I love the look of and haven't been able to part with yet.

I need to get pictures of the Violet Vixen posted as well.  She's my Kenmore 158.433 that I picked up for $14 that is missing her bobbin tension assembly.  Good news - I can still get that part.  Bad news - she has a paint chip.  I love her color though, so I may take her to a friend's brother (he has an auto body shop) to see if can mix a paint to match, or that is close enough to be worth a full paint stripping and repainting.

Cleaning Results - Vinegar

Black Betty has several plated pieces that need cleaning.  As most everyone can find, there are recommendations for using a myriad of cleaning solutions, including vague references to a baking soda/lemon juice paste (I've yet to find a "recipe" for this).  I've always had great results with vinegar on stuff around the house, so I chose to use the face plate as my test piece.  Mainly because the damage to this and the bobbin cover is identical, so it'll be a nice comparison example.

This is what the face plate looked like before a 24-hour vinegar soak.

Notice the tape damage at the top of the arc in the picture above?

Here's what it looks like after, with a very light "scrubbing" using a soft bristle toothbrush prior to a rinsing with water.

The rust popped up within a day; if I was done, I would have oiled it and not just let it air dry.  This still has a ways to go and it's getting another soak in vinegar to be followed up by a scrubbing and oiling.  The surface feels nice and smooth, so I'll be okay if it doesn't get as shiny as new.  I'm aiming for usable on this one, not perfection.  I'm anxious to get more time to put in on her, but may have to wait until I have time off at Thanksgiving.

I'm working on a good recipe for the baking soda/lemon juice solution to use on the bobbin case cover.  I'll let you know how that goes.  The brass medallion will be cleaned using Wright's Brass Cleaner - I used this during my stint as a Disneyland Cast Member and have always been pleased with the results.  I'll have pictures of the before and after on that as well.

Singer used to have a nice PDF list of serial numbers to model numbers.  It's disappeared from their site.  I asked them about it and received this back:

You can research serial numbers via our website.

Go to www.singerco.com. To the right of the SINGER 160th Anniversary emblem, click on “See More”, then go to “Learn About Your Vintage Sewing Machine”, and complete the data in each box.  This will give you a Certificate with the year your machine was manufactured.

It's kind of nice because you get this pretty certificate back, but I found the list much more useful.  I wish I had downloaded all of the PDFs they had available when I thought of it.

The Phases of Vintage Machine Addiction

I was reading over a blog that I follow, and following a link to another blog stumbled across this gem.  I'm in Phase 2 and have no delusions about Phase 3.  A fun read, hope you get at least a giggle out of it.

http://sewing-machines.blogspot.com/2010/01/sometimes-you-gotta-let-go.html

Canning Success and Vintage Machine Cleaning Tips

I've been learning to can from a friend of mine, which kind of takes time away from my vintage machine restoration projects.  But it's been a worthwhile effort.  Just this past weekend, I made my first attempt at Raspberry Preserves which came out very flavorful and yummy, and I canned up several different types of salsa.  I now have a dozen jars of salsa, a dozen jars of pickles, 4 jars of whole tomatoes, and nearly a dozen jars of Strawberry Jam and Preserves.  Here's a shot of the colorful concoctions (these went to work with me and were gone by the time lunch was over):

In addition to that, I put some Murphy's Oil Soap and elbow grease to good use and cleaned up the stains on the old Kenmore cabinet I picked up to put Black Betty in and am happy with the results.  Not so happy with the pictures though, as the before ones are no good.  I hope to post pictures of the cleaned up cabinet in a few more days, after a bit more elbow grease.

Well, I've been digging and digging and have yet to find any recommended "recipe" for the various cleaning methods I've seen out there, which I find annoying.  So, for everyone else out there, I'm going to measure my combinations of vinegar, baking soda, lemon juice, and 409 and post them here with before and after shots of the results.  Even if it only helps me, it'll be worth it.

Black Betty's buttonholer attachment has been found too, along with the manual.  Here's what I've found so far, knowing that there is more somewhere in a box in my craft room.  (I still have ones to open from our move 3 years ago).

This is the correct part number for the buttonhole attachment for a Singer 15-91.  Others work as well, but this one was original to the machine.  And I really like the "Made in U.S.A." mark.

In the next few days expect to see a few before and after pictures of a couple of plated pieces after being cleaned in vinegar or a baking soda/lemon juice mixture.

Lots of help out there

I found a really good compilation of posts for cleaning vintage machines over at TreadleOn.net.  They're not step-by-step instructions, but they're a good list of alternatives to use when cleaning the various parts of your vintage machines.  I will be trying several of these techniques on Black Betty and will post my results.  In the meantime, here's the link for you:

Cleaning Machines

There's also some mention on possible wood treatments for cabinets and cases, in case you're needing that as well.

The "Black Betty" Project

My grandmother's old Singer was a much beloved machine in my childhood.  She taught each of her grandkids to sew on it - including the boys.  We started with puppets and moved onto bigger projects.  It was also the only machine that could handle mending our horse's winter blanket and the old Boy Scout sleeping bags our other grandfather had picked up somewhere.

Originally mounted in a sewing cabinet, it had been removed years before I ever had my hands on it.  My grandfather had planned on refinishing the cabinet (which I never recall having seen), but never got it done.  We used to prop it up on a stack of Reader's Digests to use it as it didn't have a carrying case either.

Maga, a nickname given by my older sister, bravely fought the breast cancer that spread throughout her body for decades.  She was a true survivor, but lost the battle with the last round in her late 70's.  After her death, I received her beloved Singer.  It had been neglected and stuffed in a garage for years, just off the Pacific Coast, prior to coming into my possession.  The cabinet was long gone by then, and my doll that she had made for me when I was three (it's the same height and size as I was at the time) that she'd been planning on repairing for me was found in a water soaked box, with mildew damage to one leg.  I was happy to get them both, no matter what the condition.

Nearly 3 decades and many moves later, I finally can finish the job my grandfather started.  First, I found, bid on, and won another classic Singer 15 (I didn't know the model when I bid on it) in the much sought after, bent wood case. I'd originally planned on putting Black Beauty in the case, but then I won a bid on a vintage Kenmore that I'd felt sorry for and bid on simply for the cabinet.  The first winner cost me a whooping $31 and provided me with another Singer 15 with the crinkle finish, the second cost me a horrid $6 (yep, that cheap!) for a cabinet badly in need of refinishing or paint and a beautiful 1947 Kenmore of unknown function.

The challenge was to find Black Betty - I thought for sure I'd put her in my craft room, but she was nowhere to be found.  Nearly a week later, and after searching almost 3,000 sq. ft. twice, I found her on a shelf, behind the old Model T trunk in - alas - the garage.  That would have been acceptable if I still lived in dry, sunny Riverside county, but nope, I'm in the rust-belt of the MidWest now.

Here's how Black Betty looked after a dry cloth dusting and quick surface vacuuming:

I did a lot of searching online for tips on cleaning and restoring vintage Singer machines and found several suggestions, many using really caustic chemicals.  Maga would have been concerned about the toxins, so I couldn't imagine using something like Kerosene on those delicate decals.  I chose the more "delicate" option of using a few drops of Ivory Dishwashing Liquid (don't all stitchers have a bottle around?) in a cup of warm water.

Here's what I did:

1. Started with Q-tips, dipped in the warm water solution
2. Worked in a counter-clockwise circle, gently rubbing while turning the Q-tip
3. Patted dry with a dry, cotton washcloth - don't rub, pat!
4. For larger areas, I switched to cotton balls, dipped in the water solution and squeezed nearly dry

Did I mention I have no patience?  I started working larger and larger areas, finding that the cotton balls worked well on the main deck, and after about 15 minutes of this I was seeing progress (and noticed the paint chips).

Here's what Black Betty looked like after 15 minutes:

I couldn't see any of these decals when I started. I was thrilled to see this much of them as I need to make a pattern in case I need to repaint these.  Singer decals, as I've discovered, are more rare than the Siberian Tiger.  I've emailed Singer to ask that they either 1) make stencils available that we can buy, or 2) make the decals available for purchase again...you'd think they'd do it, since they could print them as needed.

Encouraged, and a bit nervous, I decided to remove the once gorgeous face plate and see what kind of rust damage may be facing me below the surface.  I was happy to see that it wasn't bad at all, and surprised to find what appears to be a nest of some type.  I'm not sure what as our mice are WAY too big to fit into a Singer.

Did you see the "mini-nest" sitting just above the needle?  I just need to find the right cleaning solution for the face plate to bring it back to it's former glory.  My camera makes it look rustier than it is, but it helps me see how much cleaning it really needs.  I also need to locate a few manuals for it, the service manual would be the most helpful, but I'll take whatever I can find.

Now, if that Yahoo Group for Vintage Singer owners would just hurry up and approve me!

PyrHaven on Etsy

Welcome to the new PyrHaven Blog!